Water Supply Engineering
1. 135 litres of water per person per day, is provided in
- Nurses homes
- Hostels
- Residential schools
- All the above
Correct answer: (D)
All the above
2. 45 litres of water per person per day, is provided in
- Office buildings
- Hotels
- Hostels
- Nurse's homes
Correct answer: (A)
Office buildings
3. A centrifugal pump is required to be primed before starting if it is located
- At higher level than water level of reservoir
- At lower level than water level of reservoir
- Both (a) and (b)
- Neither (a) nor (b)
Correct answer: (A)
At higher level than water level of reservoir
4. A circular gravity aqueduct is not generally preferred to because of
- Its maximum hydraulic mean depth
- Maximum area per unit of wetted perimeter
- Minimum cost of construction
- Its proper support on the ground
Correct answer: (D)
Its proper support on the ground
5. A city supply includes
- Domestic water demand
- Industrial and commercial water demands
- Demand for public uses and fire
- All the above
Correct answer: (D)
All the above
6. A high velocity of wash water is required for
- Rapid gravity filter with strainers
- Rapid gravity filter without strainers
- Slow sand filter with strainers
- Slow sand filter without strainers
Correct answer: (B)
Rapid gravity filter without strainers
7. A pressure conduit carrying water beneath a stream or a canal, is known as
- Sag
- Depressed pipe
- Inverted syphon
- All the above
Correct answer: (D)
All the above
8. A pressure conduit laid underground, may not be subjected to
- Internal pressure of water
- Pressure due to external load
- Longitudinal temperature stress
- Longitudinal stresses due to unbalanced pressure to bends
Correct answer: (C)
Longitudinal temperature stress
9. A slow sand filter is cleaned if its filter head is higher than
- 10 cm to 20 cm
- 20 cm to 40 cm
- 40 cm to 70 cm
- 70 cm to 120 cm
Correct answer: (D)
70 cm to 120 cm
10. A strainer type well sunk through three previous layers intervened by three impervious aquicludes, draws water from
- Top most pervious layer
- Central pervious layer
- Lowest pervious layer
- All the pervious layers
Correct answer: (D)
All the pervious layers